Frivolous At Heart

One of the things I like to eat while drinking some Budlight is Muc Kho.

I got tired of making it on the electric range, gas range, and on a fire.

So a few weeks ago I started using a bread toaster. Figured why in the heck not?!!! Come to my amazement, it worked great!!! I hope this catches on. Makes life so much easier b/c I can put the toaster right underneath the rang hood and it sucks all the foul smell from burning squid! Cheers

The kit for installing my Ipad was $200. That includes sliding kit plus the 90 degree 30 pin connector. No thanks. So I purchased an Ipad extended battery and used it. I purchased the bezel from SoundManCa though, to fiberglass ontop of my contraption. So far so good. Keep in mind, I have never worked with fiberglass before. Since then, I’m loving it. Easy to work with and so many countless of jobs you can use it for to bond with anything. I know i need a new blade thought 😉 It’s okay though b/c I wont see the opening once the ipad is installed! Almost finish! Bondo and bezel installed = Finish

So I purchased an infrared thermometer and it works quite well. Only thing is that it looks cheap and feels cheap – do I really care? Not really 😉 It works and works well. I use it to see the difference in body part temperatures (sprained ankle vs one that isn’t) to let me know how to proceed. That’s one of many other uses. I’m happy now…

I purchased a new Optima 27F yellow deep cycle battery. The technician didn’t do a very sound job. The terminals were still wiggling after the install. You can pull on it and it will move. He’s the “manager” of the store. I took it home and tighten the battery terminals in less than a minute with a 10mm wrench…

To be humble is to look at life with sincerity and society with patience.

I was just experimenting just for kicks and used table salt with hot tap water. It turned out clear and left my anode with something that is less desirable. What’s that yellow stuff?

Had some extra time this week to install a SS tube to use and agitate my CS setup. The result was satisfying none the less. I found that I needed less washing soda to lower the required voltage (0.75ml vs 2.5ml) to produce CS and I am happy because of it. Cheers!

300WSM & 308
Hodgdon’s H4350, H4831
IMR 4064 & 7828
RL-17

I got the below info from http://www.6mmbr.com/gunweek092.html . Hope they don’t mind. 

So I was out on a hog hunt. No freak’n hogs but a crap load of bunnies. They ate all the corn from 7-2am… O man was I mad… Mad at myself for not having a 22LR or a slingshot. I took a shot with my 300WSM just for shits and uhm… Lets just say I made hamburger out of that bunny.  Each bullet cost me $3… Dang I need to start reloading!!!

So I purchased a slingshot. I will not be carrying two rifles with me- one is heavy enough. This little bad boy will be perfect for when I don’t see hogs- I’ll shoot some bunnies for dinner instead 😉

http://www.simple-shot.com

1/02/2016 Update: Slingbow out of the above
-One whisker biscuit
-One Reel
-One Cajun Reel Holder

On a quick note, I did comparison on hog lights and found them to be similar. Chinese items are generally the same crap, different names on them. I deduced that much so I took a chance and came out on top. Plus I didn’t want to buy the dang light for $160

I got all my parts in today. Parts you’ll need (those links will break as time goes on so you can always search for them if the links break)

—CREE 3W Green Light LED Bulb Ebay
—Ultrafire C8 Q5  Amazon

I basically started off with the ultrafire C8 Q5 and took the light led module apart. It’s the same guts as regular LED lights just matched to the ultrafire C8 Q5 differently.

Now take the ebay purchased led module. Take it apart and preserve the module, wires, control board. Now install the new module, wires, control board into the Ultrafire C8 Q5

When I pried off the old module, there was glue underneath. I didn’t use any glue when i re installed it because the plastic cap kept everything in place.

http://varmintlights.com/ wanted $75 + shipping so say $85 total. I spent a total of $11 on the Ultrafire C8 Q5, $26 x 2 CREE 3W Green Light LED Bulbs. So for $24, I have one hog light.

—————————————————————————————————-

I did the same thing for the Ultrafire Wf 502b flashlight ($14) + CREE 3W Green Light LED Bulb ($13) = $27 for a second hog light. Here are both taken together. Shit is bright!!!

You can buy the mount and the finger trigger for another $20. You still save money vs buying at the mentioned website. I’m poor and I like to save money.