I Installed some shelves purchased at the HOME DEPOT. It was pretty easy.

First, I measured the space between each hanger. Then transfer it to the wall. Those two lines you see drawn to the wall, are the measured lines. I used expensive anchors (I have a few hundred of them actually). Each able to hold 30lbs. I used six of them, so do the math=)

Everything is plumb and straight as indicated by the level.

Hang the hangers on. Start installing the shelves and you are done!

The hole in the middle was not fitting my style so I drilled all six new holes so that my 2.5″ screws would not burst through the other side of the board.

It looks pretty good to me!